Technical Committee Chair

Dr. William M. Cox, Director and Principal Consultant, Corrosion Management Limited, UK

International Technical Program Committee

Prof. Jamal Khatib, Civil Engineering (Construction Materials), Faculty of Science and Engineering University of Wolverhampton, UK
Prof. Abdelkrim Abourriche, Industrial Engineering Department, National School of Applied Sciences, University Cadi Ayaad, Morocco
Prof. Mohamed Bournane, Département des sciences appliquées, Université du Québec à Chicoutimi, Québec, Canada
Prof. Antonio Gloria, Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, Italy
Prof. Rajkumar Durairaj, Department of Mechanical and Material, Engineering, Universiti Tunku Abdul Rahman (UTAR), Malaysia
Prof. Meor Othman Hamzah, School of Civil Engineering, Universiti Sains Malaysia, Malaysia
Prof. Ali Zaidi, Department of Civil Engineering, Laghouat University, Algeria
Prof. Tan Peng, Department of Thermal Science and Energy Engineering, University of Science and Technology of China, China
Prof. Tevfik KÜÇÜKÖMEROĞLU, Department of Mechanical Engineering, Karadeniz Technical University, TURKEY
Prof. Gianni Barucca, Department SIMAU, University Politecnica delle Marche, Italy
Prof. Randa Abdel-Karim, Metallurgy and Advanced Materials, Faculty of Engineering, Cairo University, Egypt
Prof. Qixin Guo, Department of Electrical and Electronic Engineering, Director of Synchrotron Light Application Center, Saga University, Japan
Prof. Osman Adiguzel, Department of Physics, Faculty of Science, Firat University, Turkey
Prof. Semra Kurama, Department of Materials Science & Engineering, Eskisehir Technical University, Turkey
Assoc. Prof. Bing Yang, Vice Dean of State Key Laboratory of Traction Power, Southwest Jiaotong University, China
Assoc. Prof. Fateh Mebarek-Oudina, Department of Physics, Faculty of Sciences, Skikda University, Algeria
Assoc. Prof. Kaili Zhang, Department of Mechanical Engineering, City University of Hong Kong, Hong Kong, China
Assist. Prof. Timur Sh. Atabaev, Department of Chemistry, Nazarbayev University, Kazakhstan
Assist. Prof. Montadhar Aboodi Al-moussawi, Materials Engineering, Al-Furat Al-Awsat Technical University, Iraq
Asst. Prof. Gaochuang Cai, Faculty of Engineering, Fukuoka University, Japan
Dr. Payam Shafigh, Department of Building Surveying, University of Malaya, Malaysia
Dr. Xiaoxing Lu, Principal Process R&D Engineer, Integra Technologies Inc, El Segundo, CA, US
Dr. Boliang Zhang, Consortium for Innovation in Manufacturing and Materials (CIMM), LSU, USA
Dr. Mohamed Sayed Selim, Senior Researcher, Egyptian Petroleum Research Institute (EPRI), Ministry of Scientific Research, Egypt
Dr. Rezwanul Haque, School of Science and Engineering, University of the Sunshine Coast, Australia
Dr. Alokesh Pramanik, Department of Mechanical Engineering, Curtin University, Australia
Dr. Abdolali Fayyaz, Department of Materials Engineering, Science and Research Branch, Islamic Azad University, Iran
Dr. Yuling Niu, Senior Electronic Packaging Engineer, Qualcomm Technology Inc., US
Dr. Santiranjan Shannigrahi, Agency for Science Technology and Research (A*STAR), Singapore
Dr Sivakumar Balakrishnan, Department of Applied Sciences, PNG University of Technology (Unitech), Papua New Guinea
Dr. Lai Chin Wei, Nanotechnology & Catalysis Research Centre, University of Malaya, Malaysia
Dr. Francisco José Gomes da Silva, Department of Mechanical Engineering, Polytechnic of Porto, Portugal
Mr. Mohammad Rahimi-Gorji, Experimental Surgery Lab, Faculty of Medicine and Health Science & IBiTech- bioMMeda, Ghent University, Ghent, Belgium
Amin Rabiei Baboukani, PhD Candidate, Department of Mechanical and Materials Engineering, Florida International University, Miami, FL, USA
Seyed Hamed Mahdaviani, Senior Catalyst Researcher, Catalysis Research Group, R&D Center, Arak Petrochemical Company (ARPC), Iran